Adapter R3/4 inch to R3/8 for water-jet vacuum pump art. no. 77094

For generation of a vacuum and to siphon off liquids and vapours (if necessary, with a suction main or condensation trap connected upstream). Pump fluid: Water Length of the unit: approx. 210 mm (R 3/4″ connector fitted) Weight: approx. 33 g (R 3/4“ connector fitted) - High chemical resistance, since the pumped media only come into contact with polypropylene, FKM and PTFE. - Operating temperature up to a maximum of 80 °C. - Integrated non-return valve increases operating safety. - Simple operation, and easy to clean. - Detachable vacuum connection. - Variety of supplied adapters simplify connections to most water sources, and additional reducing adapters are available. Very low water consumption: The flow configuration has been optimised, resulting in a 33% reduction of water consumption (190 liters/h at 3.5 bar water supply pressure). Constant discharge pressure: The discharge pressure of 16 mbar (water temperature: 12 °C) is reachable across a wide range of water supply pressures of from 3 to 6 bar. High suction capacity: The suction capacity is approx. 400 L/hour of air (vs. atmospheric pressure, 12 °C water temperature, 3.5 bar water supply pressure).